Ball valve with a free-turning nut 1222103-1222104 | Distributor for sanitary water

Ball valve with a free-turning nut
1222103-1222104

The valve is most commonly used in cases where a free-turning nut is required for direct mounting on the system due to lack of space. It is often used when connecting to a drinking water distributor, during the installation of water meters, and in similar cases where space is limited. A seal is included with the valve.

Drawing

Category:

Distributor for sanitary water

ident	EAN	DN	PN	G [in]	L [mm]	L1 [mm]	L2 [mm]	L3 [mm]	H	A	Sw	Sw1	peckaging
1222103	3838963247401	20	25	G3/4˝	73,2	9	11	65,5	41,8	55	30	31	25
1222104	3838963247449	20	25	G1˝	84	12	18	74,5	41,8	55	37	38	16

_{*T= -30°C... +150°C (water from 0,5°C to +110°C - witout steam)}

Ball valves with a free-turning nut are most commonly used when installing brass distributors 15300xx (2 8530 xx), during the installation of water meters, and in similar situations where space is limited. These valves are designed for easy and quick installation, thanks to the free-turning nut. Please note that a flat seal is also included with the valve for reliable sealing.

Declaration of conformity - SLO, ENG, DEU

Operating data:

Maximum operating pressure: 25 bar
Minimum operating temperature: -30 °C (water 0.5 °C)
Maximum operating temperature: 150 °C (water 110 °C, without steam)
Medium: sanitary water or water for heating systems
Connections: internal G3/4" (1222103) and G1" (1222104) according to ISO 228

Medium:

The purity of the water must comply with the standards ÖNORM H 5195 and VDI 2035. The use of ethylene or propylene glycol in a mixing ratio of 25–50% is permitted. EPDM seals are sensitive to lubricants containing mineral oils, which may cause damage to the seals. When using ethylene glycol products for freeze and corrosion protection, please follow the manufacturer's documentation.